Peugeot Boxer (1994–2006): interior dimensions of every versionThe same van as the Fiat Ducato 244
The Peugeot Boxer (1994–2006) is the same van as the Fiat Ducato 244: same body and same interior dimensions, only the badge changes. Here are the dimensions of its 4 versions and what fits inside.
Choose length (L) and height (H)
- Cargo length
- 3.00 m
- Height
- 1.85 m
- Between wheel arches
- 142 cm
- Payload
- 1,250 kg
It’s the same van as…
Same body and same interior dimensions: only the badge changes (and sometimes the front end or the engines). Everything on this page applies to them too.
Fiat Ducato 2442002–2006
Citroën Jumper1994–2006
Also sold as Citroën Relay.
Versions and dimensions
| Version | Cargo length | Width | Height | Between wheel arches | Sliding door | Payload |
|---|---|---|---|---|---|---|
| L1H1 | 2.60 m | 181 cm | 1.62 m | 142 cm | 107 cm × 140 cm | 1,350 kg |
| L2H1 | 3.00 m | 181 cm | 1.62 m | 142 cm | 107 cm × 140 cm | 1,300 kg |
| L2H2 | 3.00 m | 181 cm | 1.85 m | 142 cm | 107 cm × 160 cm | 1,250 kg |
| L3H2 | 3.50 m | 181 cm | 1.85 m | 142 cm | 107 cm × 160 cm | 1,200 kg |
Interior dimensions of the cargo area, without lining or insulation. Allow a few centimetres less once they’re in. Each brand may name its versions differently: here they use the Fiat Ducato 244 names.
Layouts that fit
This is how the editor places each layout in the Boxer L2H2. Open it and change it to suit you.
Weekend getaways
Rear bed with a garage, kitchen by the door and a fridge.
10 items
- Sleeping
- Kitchen and gas
- Bathroom and water
- Electrics
- Other
- Sliding door
Plans seen from above, with the cab on the left and the sliding door at the bottom.
If you’re torn between the Boxer and…
Questions
Does the Peugeot Boxer have the same dimensions as the Fiat Ducato 244?
Yes: the Peugeot Boxer and the Fiat Ducato 244 are the same van, with the same body and the same interior dimensions in every version. The dimensions on this page apply to both.
Which Boxer version is best for a camper conversion?
To stand up: L2H2 and L3H2. To sleep crossways: L1H1, L2H1, L2H2, and L3H2. The shortest, for town and garages: L1H1.
Does a transverse bed fit in the Boxer?
Yes: the L1H1, L2H1, L2H2, and L3H2 have 142 cm between the wheel arches, and 136 cm is enough for a bed crossways.
How much weight can a converted Boxer carry?
Depending on the version, the Boxer has a factory payload of 1,200–1,350 kg (approx.). Insulation, lining, furniture, water, luggage and people all count: the editor adds it up as you design and warns you if you go over.