Ram ProMaster (US): interior dimensions of every version
4 versions of the ProMaster (since 2014) with the dimensions of the cargo area.
Choose length (L) and height (H)
- Cargo length
- 3.12 m
- Height
- 1.93 m
- Between wheel arches
- 142 cm
- Payload
- 1,650 kg
Similar, but not the same
Same base, with a difference worth knowing before you use these dimensions.
Fiat Ducatosince 2006
The same body in Europe (also Citroën Jumper and Peugeot Boxer), with a different front end, L×H versions and an H3 roof. Fiat gives 1.87 m of inside width.
Other ProMaster versions with the same body: ProMaster EV (electric).
Versions and dimensions
| Version | Cargo length | Width | Height | Between wheel arches | Sliding door | Payload |
|---|---|---|---|---|---|---|
| 136″ low | 3.12 m | 192 cm | 1.66 m | 142 cm | 125 cm × 149 cm | 1,700 kg |
| 136″ high | 3.12 m | 192 cm | 1.93 m | 142 cm | 125 cm × 176 cm | 1,650 kg |
| 159″ high | 3.71 m | 192 cm | 1.93 m | 142 cm | 125 cm × 176 cm | 1,600 kg |
| 159″ ext. | 4.07 m | 192 cm | 1.93 m | 142 cm | 125 cm × 176 cm | 1,550 kg |
Interior dimensions of the cargo area, without lining or insulation. Allow a few centimetres less once they’re in.
Layouts that fit
This is how the editor places each layout in the ProMaster 136″ high. Open it and change it to suit you.
Weekend getaways
Rear bed with a garage, kitchen by the door and a fridge.
10 items
Full-time vanlife
Enclosed bathroom, long kitchen, fixed bed, and off-grid power and water.
24 items
- Sleeping
- Kitchen and gas
- Bathroom and water
- Electrics
- Other
- Sliding door
Plans seen from above, with the cab on the left and the sliding door at the bottom.
If you’re torn between the ProMaster and…
Questions
Which ProMaster version is best for a camper conversion?
To stand up: 136″ high, 159″ high, and 159″ ext.. To sleep crossways: 136″ low, 136″ high, 159″ high, and 159″ ext.. The shortest, for town and garages: 136″ low.
Does a transverse bed fit in the ProMaster?
Yes: the 136″ low, 136″ high, 159″ high, and 159″ ext. have 142 cm between the wheel arches, and 136 cm is enough for a bed crossways.
How much weight can a converted ProMaster carry?
Depending on the version, the ProMaster has a factory payload of 1,550–1,700 kg (approx.). Insulation, lining, furniture, water, luggage and people all count: the editor adds it up as you design and warns you if you go over.