Language: English

Peugeot Boxer: interior dimensions of every versionThe same van as the Fiat Ducato

The Peugeot Boxer (since 2006) is the same van as the Fiat Ducato: same body and same interior dimensions, only the badge changes. Here are the dimensions of its 7 versions and what fits inside.

Cargo length
3.71 m
Height
1.93 m
Between wheel arches
142 cm
Payload
1,400 kg
See the L3H2 spec sheet

It’s the same van as…

Same body and same interior dimensions: only the badge changes (and sometimes the front end or the engines). Everything on this page applies to them too.

  • Fiat Ducatosince 2006

  • Citroën Jumpersince 2006

    Also sold as Citroën Relay.

  • Opel Movanosince 2021

    The pre-2021 one is a different van: the Renault Master.

    Also sold as Vauxhall Movano.

  • Toyota Proace Maxsince 2024

    Different grille, bumpers and wheels.

  • Iveco eSuperJollysince 2025

    Electric only.

Similar, but not the same

Same base, with a difference worth knowing before you use these dimensions.

  • Ram ProMaster (US)since 2014

    US and Canada version: its own front end, named by wheelbase in inches, and only low and high roofs. Ram measures the inside width differently (1.92 m).

Versions and dimensions

VersionCargo lengthWidthHeightBetween wheel archesSliding doorPayload
L1H12.67 m187 cm1.66 m142 cm108 cm × 149 cm1,500 kg
L2H13.12 m187 cm1.66 m142 cm125 cm × 149 cm1,500 kg
L2H23.12 m187 cm1.93 m142 cm125 cm × 176 cm1,450 kg
L3H23.71 m187 cm1.93 m142 cm125 cm × 176 cm1,400 kg
L3H33.71 m187 cm2.17 m142 cm125 cm × 176 cm1,400 kg
L4H24.07 m187 cm1.93 m142 cm125 cm × 176 cm1,310 kg
L4H34.07 m187 cm2.17 m142 cm125 cm × 176 cm1,280 kg

Interior dimensions of the cargo area, without lining or insulation. Allow a few centimetres less once they’re in. Each brand may name its versions differently: here they use the Fiat Ducato names.

Which one to choose

To stand up
L2H2, L3H2, L3H3, L4H2, and L4H3
To sleep crossways (1.36 m or more between the wheel arches)
L1H1, L2H1, L2H2, L3H2, L3H3, L4H2, and L4H3
The shortest, for town and garages
L1H1: 2.67 m
The one with the highest payload
L1H1: 1,500 kg

Layouts that fit

This is how the editor places each layout in the Boxer L3H2. Open it and change it to suit you.

  • Weekend getaways

    Rear bed with a garage, kitchen by the door and a fridge.

    10 items

  • Full-time vanlife

    Enclosed bathroom, long kitchen, fixed bed, and off-grid power and water.

    24 items

  • Sleeping
  • Kitchen and gas
  • Bathroom and water
  • Electrics
  • Other
  • Sliding door

Plans seen from above, with the cab on the left and the sliding door at the bottom.

Questions

Does the Peugeot Boxer have the same dimensions as the Fiat Ducato?

Yes: the Peugeot Boxer and the Fiat Ducato are the same van, with the same body and the same interior dimensions in every version. The dimensions on this page apply to both.

Which Boxer version is best for a camper conversion?

To stand up: L2H2, L3H2, L3H3, L4H2, and L4H3. To sleep crossways: L1H1, L2H1, L2H2, L3H2, L3H3, L4H2, and L4H3. The shortest, for town and garages: L1H1.

Does a transverse bed fit in the Boxer?

Yes: the L1H1, L2H1, L2H2, L3H2, L3H3, L4H2, and L4H3 have 142 cm between the wheel arches, and 136 cm is enough for a bed crossways.

How much weight can a converted Boxer carry?

Depending on the version, the Boxer has a factory payload of 1,280–1,500 kg (approx.). Insulation, lining, furniture, water, luggage and people all count: the editor adds it up as you design and warns you if you go over.

Design your Boxer in 3D

Design in a Boxer